(Printable Brochure)

Venturi Driven Ozonator For Small In-Ground Pools or Above-Ground Pools up to 15,000 Gallons

The PZ4 has a dual-cavity, rugged anodized aluminum, line-grounded case that stands vertically. It can be attached to the pack or mounted on the wall. Under certain conditions it can even be set on the ground. Air is supplied to the unit through filtering slots on the bottom to prevent insects from getting inside the unit. The electrical system is completely insulated internally in a separate sealed housing, and the ballast is mounted high above the base. In the event water inadvertently enters the ozone chamber, it simply runs past a completely insulated arc assembly and out through the slotted input filter.

The PZ4 is easy to install with either a bypass or in-line venturi mixer to provide maximum ozone absorption. The PZ4 ozone system for above-ground pools is designed for quick turnkey installation. The in-line injection system installs with simple connections — no cutting or drilling. Its rugged construction meets the requirements for in-ground and above-ground installations. The PZ4 is weatherproof and features an air filter/dryer under the system. The clear gasketing glows when the system is on. The PZ4 system is rated for pools up to 15,000 gallons. It is Underwriter's Laboratories Classified. The PZ4 has a two year hardware warranty on all parts.

In-Line Installation

Standard System

• 110 VAC, 60 HZ; .4 amps
• Dual 3-prong NEMA plug and receptacle outlet

Optional Features

• Electrical: 230 VAC, 60 hz; .4 amps, 230 VAC, 50 hz; .4 amps
• Connector: 3-wire NEMA field wiring compartment

Specifications

• Operating Temperature: +25º F. to +140º F.
• Shipping Weight: 9 lbs. (220/240 system: 11 lbs.)
• Size: 10"x 7" x 6"
• Case Construction: Polymer Coated/Anodized Aluminum Extrusion

Safe and Simple by Design

The PZ4 offers simple turnkey installation and features dual electrical hookups for safe, easy electrical connections. Air is supplied from the bottom of the unit through filtering slots to prevent insects from getting inside the unit. The electrical system is completely insulated internally in a separate sealed housing, and the ballast is mounted high above the base.

Patents #5,075,016; #6,192,911; #6,426,053; #6,342,154 and patents pending.