Back to Top

Surface Sanitation Sprayer System

Prozone’s Patented Hybrid Advanced Oxidation Processor brings superior sanitation to surfaces in sprayer form. The Prozone Surface Sanitation Sprayer System can access hidden cracks and crevices that could harbor dangerous microorganisms. There is no danger of spreading those harmful contaminants beyond the cleaning area or into drains. Testing has shown that Prozone’s aqueous ozone has the residual antimicrobial ability to continue to oxidize and destroy contaminants. Over time, sanitizing with Prozone’s sprayer will reduce the time needed to spend sanitizing. By oxidizing grease, slipping dangers are reduced.

The Prozone Surface Sanitation Sprayer System provides ozone and hydroxyl enriched cold water for direct food contact applications and hard surface sanitation. It is a high pressure, self contained mobile sanitation system that provides 2.1 GPM water flow with a residual ozone dose of 2.0 PPM at the end of the spray nozzle attached to a 25’ hose.

Surface Sanitation Sprayer Prozone

Advantages

  • Powerful disinfection, eliminates pesticides, viruses, and bacteria without the use of harmful chemicals
  • Consistent on-demand NOx free ozone production (no harmful byproducts, just oxygen)
  • Does not require an oxygen source or concentrator
  • Does not require an air dryer
  • FDA, USDA, & EPA approved antimicrobial agent
  • 2 PPM of ozone is equal to 400 PPM of chlorine
  • Tap water as the only required input
  • Non-corrosive sanitation solution
  • 20,000 hours Germicidal UV arc life
Surface Sanitation Sprayer Close Up Prozone

Applications

  • Surface sanitation of floors & walls
  • Poultry, Seafood & Meat Processing
  • Wineries
  • Greenhouses & Gardens
  • Dairies
  • Restaurants
  • Veterinary Clinics
  • Grain Processing
  • Aquaculture Tanks
Surface Sanitation Sprayer Wand Prozone
rainbow bar

Surface Sanitation Sprayer System Specifications

Delivery hose legnth: 25’
Delivery hose diameter: 3/8 “
Wand Type: Trigger
Supply Water Flow: 2.1 GPM
Residual Ozone: 2.0 PPM
Pressure: 1200 PSI
Power Requirements: 115 VAC
Input Water : Municipal/Tap
Input Water Temperature: 40-80°F
Engine/Motor: 2.3 HP, 115 V, 1 PH,
GFI Included
Drive Type: Direct
Pump Style: Triplex, Oil Bath,
Ceramic Plungers
Chemical: Low Pressure, Metered
Lengnth: 48.5”
Width: 32.5“
Height: 29”


Patents, International Patents and Patents Pending
ozone generators clean air and water
ozone generators clean air and water
Social media & sharing icons powered by UltimatelySocial